Stainless Steel 430 Material Property Data Sheet
Do you need custom fasteners created with Stainless Steel 430? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing
Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Stainless Steel 430 Bar Stock we have available to meet your needs.
AK Steel Ferritic Stainless steel 430
Subcategory: Metal; Stainless Steel; T 400 Series Stainless Steel; Ferritic
Close Analogs: Iron content calculated as remainder
|Component|| Wt. %|
|C||Max 0.12|| |
|Cr||16 - 18|| |
|Fe||Min 79.31|| |
|Mn||Max 1|| |
|Ni||Max 0.5|| |
|P||Max 0.04|| |
|S||Max 0.03|| |
|Si||Max 1|| |
AK Steel 430 combines good corrosion resistance and heat and oxidation resistance up to 1500°F with good mechanical properties. Typical consumer applications include automotive trim and molding, furnace combustion chambers, dishwashers, range hoods, gas burners, gutters, steam iron bases and flatware. Industrial applications range from interior architectural applications to nitric acid plant equipment.
Information provided by AK Steel
|Density||7.74 g/cc||0.28 lb/in³|| |
|Hardness, Rockwell B||85||85|| |
|Tensile Strength, Ultimate||483 MPa||70100 psi|| |
|Tensile Strength, Yield||310 MPa||45000 psi|| 0.2% YS|
|Elongation at Break||25 %||25 %|| in 2 inches|
|Modulus of Elasticity||200 GPa||29000 ksi|| |
|Electrical Resistivity||6e-005 ohm-cm||6e-005 ohm-cm|| |
|CTE, linear 20°C||10.4 µm/m-°C||5.78 µin/in-°F|| 0 to 100°C|
|CTE, linear 20°C||11.4 µm/m-°C||6.33 µin/in-°F|| to 538°C|
|Heat Capacity||0.46 J/g-°C||0.11 BTU/lb-°F|| 0°C to 100°C|
|Thermal Conductivity||26.1 W/m-K||181 BTU-in/hr-ft²-°F|| 100°C|
|Thermal Conductivity||26.3 W/m-K||183 BTU-in/hr-ft²-°F|| 500°C||
This information is provided by
MatWeb.com, The Online Materials Database and is reprinted with their permission.
Copyright 1996-2005 by Automation Creations, Inc.
The contents, results, and technical data on this page may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.com.