quality fasteners on time of the higest grade materials including stainless steel, copper, brass, Ph grades, Aluminum, Exotics and more
Quality bolts, nuts, screws, sockets and studs manufactured of quality materials to inch fastener standards Home of Vegas Fastener Manufacturing Vegas Fastener Manufacturing as a quality alloy, a blend of the skills, capabilities and extensive experience of its manufacturing team. What products we make and how we can manufacture what you need to your exact specifications Request a quote Contact Us

Toll Free: 888-651-9223            

Stainless Steel 416 Material Property Data Sheet

Do you need custom fasteners created with Stainless Steel 416? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Stainless Steel 416 Bar Stock we have available to meet your needs.

 

AISI Type 416 Stainless Steel, annealed bar


Subcategory: Heat Resisting; Metal; Stainless Steel; T 400 Series Stainless Steel

Close Analogs: AISI Type 416 Se

Key Words: UNS S41600, ASME SA194, ASTM A194, ASTM A314, ASTM A473, ASTM A581, ASTM A582, FED QQ-W-423, MIL SPEC MIL-S-862, SAE J405(51416), DIN 1.4005, UNI X 12 CrS 13, B.S. 416 S 21, martensitic, ISO 683/13 7

Component   Wt. %
CMax 0.15 
Cr13 
Fe84 
MnMax 1.25 
MoMax 0.6 
PMax 0.06 
SMax 0.15 
SiMax 1 

Material Notes:
Molybdenum content optional

Physical PropertiesMetricEnglishComments
Density7.8 g/cc0.282 lb/in 

Mechanical Properties
Hardness, Rockwell B8282 
Tensile Strength, Ultimate515 MPa74700 psi 
Tensile Strength, Yield275 MPa39900 psi at 0.2% offset
Elongation at Break30 %30 % in 50 mm
Modulus of Elasticity200 GPa29000 ksi 
Shear Modulus83 GPa12000 ksi 

Electrical Properties
Electrical Resistivity5.7e-005 ohm-cm5.7e-005 ohm-cm at 20C, 0.000108 Ohm-cm at 650C
Magnetic Permeability700 - 1000700 - 1000 annealed condition at RT

Thermal Properties
CTE, linear 20C9.9 m/m-C5.5 in/in-F from 0-100C (32-212F)
CTE, linear 250C11 m/m-C6.11 in/in-F at 0-315C (32-600F)
CTE, linear 500C11.5 m/m-C6.39 in/in-F 0-540C, 11.7 at 0-650C
Heat Capacity0.46 J/g-C0.11 BTU/lb-F from 0-100C (32-212F)
Thermal Conductivity24.9 W/m-K173 BTU-in/hr-ft-F at 100C; 28.7 W/m-K at 500C
Melting Point1480 - 1530 C2700 - 2790 F 
Solidus1480 C2700 F 
Liquidus1530 C2790 F 
Maximum Service Temperature, Air675 C1250 F Continuous Service
Maximum Service Temperature, Air760 C1400 F Intermittent Service

References are available for this material.

 


This information is provided by MatWeb.com, The Online Materials Database and is reprinted with their permission.

Copyright 1996-2005 by Automation Creations, Inc. The contents, results, and technical data on this page may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.com.