quality fasteners on time of the higest grade materials including stainless steel, copper, brass, Ph grades, Aluminum, Exotics and more
Quality bolts, nuts, screws, sockets and studs manufactured of quality materials to inch fastener standards Home of Vegas Fastener Manufacturing Vegas Fastener Manufacturing as a quality alloy, a blend of the skills, capabilities and extensive experience of its manufacturing team. What products we make and how we can manufacture what you need to your exact specifications Request a quote Contact Us

Toll Free: 888-651-9223            

Stainless Steel 310 Material Property Data Sheet

Do you need custom fasteners created with Stainless Steel 310? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Stainless Steel 310 Bar Stock we have available to meet your needs.

 



This information is provided by MatWeb.com, The Online Materials Database and is reprinted with their permission.

Copyright 1996-2005 by Automation Creations, Inc. The contents, results, and technical data on this page may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.com.

Allegheny Ludlum Austenitic Stainless Steel 310


Subcategory: Metal; Stainless Steel; T 300 Series Stainless Steel; T S30000 Series Stainless Steel

Key Words: UNS S31000

Composition Notes: Iron content calculated as remainder

Component   Wt. %
C0.25 
Cr24 - 26 
Fe48.175 - 53.175 
Mn2 
Ni19 - 22 
P0.045 
S0.03 
Si1.5 

Material Notes:

Characteristics: comparable corrosion resistance, superior resistance to oxidation, and the retention of a larger fraction of room temperature strength than common austenitic alloys. Good creep deformation resistance.

Applications:Heat treatment industry-conveyor belts, rollers, burner parts, refractory supports, retorts linings, oven linings, fans, tube hangers, baskets, and trays. Chemical process industry- containers for hot concentrated acids, ammonia, and sulfur dioxide. Food processing industry- used in contact with hot acetic and citric acid.

Information provided by Allegheny Ludlum

Physical PropertiesMetricEnglishComments
Density8.03 g/cc0.29 lb/in at 20C

Mechanical Properties
Tensile Strength, Ultimate617 MPa89500 psi ASTM E8
Tensile Strength, Ultimate at Elevated Temperature209 MPa30300 psi 816C; ASTM E8
Tensile Strength, Ultimate at Elevated Temperature394 MPa57100 psi 649C; ASTM E8
Tensile Strength, Ultimate at Elevated Temperature48 MPa6960 psi 1093C; ASTM E8
Tensile Strength, Ultimate at Elevated Temperature483 MPa70100 psi 538C; ASTM E8
Tensile Strength, Ultimate at Elevated Temperature516 MPa74800 psi 427C; ASTM E8
Tensile Strength, Ultimate at Elevated Temperature528 MPa76600 psi 204C; ASTM E8
Tensile Strength, Ultimate at Elevated Temperature76 MPa11000 psi 871C; ASTM E8
Tensile Strength, Yield292 MPa42400 psi 0.2% offset ; ASTM E8
Tensile Strength, Yield at Elevated Temperature136 MPa19700 psi 816C; ASTM E8
Tensile Strength, Yield at Elevated Temperature156 MPa22600 psi 649C; ASTM E8
Tensile Strength, Yield at Elevated Temperature167 MPa24200 psi 538C; ASTM E8
Tensile Strength, Yield at Elevated Temperature188 MPa27300 psi 427C; ASTM E8
Tensile Strength, Yield at Elevated Temperature217 MPa31500 psi 204C; ASTM E8
Elongation at Break45 %45 % ASTM E8
Elongation at Break at Elevated Temperature36 %36 % 538C; ASTM E8
Elongation at Break at Elevated Temperature37 %37 % 427C; ASTM E8
Elongation at Break at Elevated Temperature37.5 %37.5 % 204C; ASTM E8
Elongation at Break at Elevated Temperature41.5 %41.5 % 649C; ASTM E8
Elongation at Break at Elevated Temperature65 %65 % 871C; ASTM E8
Elongation at Break at Elevated Temperature66 %66 % 816C; ASTM E8
Elongation at Break at Elevated Temperature77 %77 % 1093C; ASTM E8
Creep Strength138 MPa20000 psi 1100F, 1% in 10,000 hr
Creep Strength20 MPa2900 psi 1450F; 1% in 10,000 hr
Rupture Strength138 MPa20000 psi 1100F, 10,000 hr
Rupture Strength20 MPa2900 psi 1650F; 10,000 hr
Modulus of Elasticity200 GPa29000 ksi 
Shear Modulus77 GPa11200 ksi 

Electrical Properties
Electrical Resistivity7.8e-005 ohm-cm7.8e-005 ohm-cm at 20C
Magnetic Permeability1.021.02 at 200H

Thermal Properties
CTE, linear 20C15.9 m/m-C8.83 in/in-F 20C-100C
CTE, linear 500C17.1 m/m-C9.5 in/in-F 20C-500C
CTE, linear 1000C18.9 m/m-C10.5 in/in-F 20C-1000C
Heat Capacity0.502 J/g-C0.12 BTU/lb-F 0C-100C
Thermal Conductivity13.8 W/m-K95.8 BTU-in/hr-ft-F 20C-100C
Thermal Conductivity at Elevated Temperature18.7 W/m-K130 BTU-in/hr-ft-F 20C-500C

 


This information is provided by MatWeb.com, The Online Materials Database and is reprinted with their permission.

Copyright 1996-2005 by Automation Creations, Inc. The contents, results, and technical data on this page may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.com.