Nitronic Alloy 60 Material Property Data Sheet
Do you need custom fasteners created with Nitronic Alloy 60? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing
Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Nitronic Alloy 60 Bar Stock we have available to meet your needs.
Nitronic« 60 Austentic Stainless, Annealed
Subcategory: Heat Resisting; Metal; Stainless Steel; T S20000 Series Stainless Steel
Key Words: Fasteners A193/A194; Welding Wire AWS ER218, UNS S21800; Bar ASTM A276 ASTM A479, AMS 5848; Plate/Sheet ASTM A240; Forgings ASTM A314
|Component|| Wt. %|
|N ||0.14|| |
Iron content above calculated from remainder. Annealed applies to tensile and/or hardness; other properties are typical of this alloy.
Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a high temperature alloy for temperatures around 1800║F. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. The additions of silicon and manganese have given the alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness. The chromium and nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight and cost reductions.
Data provided by High Performance Alloys, Inc.
High Performance Alloys, Inc. is a secondary producer and distributor of superalloys and high performance steel. Save $5.00 in HP Alloys' online store! Simply enter "MatWeb" as your coupon code when ordering. It may be combined with other coupons and discounts for additional savings. (800) 472-5569 or (765) 675-8871. http://www.hpalloy.com
|Density||7.62 g/cc||0.275 lb/in│|| |
|Hardness, Brinell||210||210|| Estimated from Rockwell B|
|Hardness, Knoop||245||245|| Estimated from Rockwell B|
|Hardness, Rockwell A||58||58|| Estimated from Rockwell B|
|Hardness, Rockwell B||95||95|| |
|Hardness, Vickers||215||215|| Estimated from Rockwell B|
|Tensile Strength, Ultimate||710 MPa||103000 psi|| |
|Tensile Strength, Yield||414 MPa||60000 psi|| 0.2% Offset|
|Elongation at Break||64 %||64 %|| |
|Reduction of Area||74 %||74 %|| |
|Modulus of Elasticity||179 GPa||26000 ksi|| In Tension|
|Poisson's Ratio||0.3||0.3|| Calculated|
|Shear Modulus||69 GPa||10000 ksi|| |
|Electrical Resistivity||0.00013 ohm-cm||0.00013 ohm-cm|| |
|CTE, linear 20░C||15.8 Ám/m-░C||8.78 Áin/in-░F|| 20-95░C||
áThis information is provided by
MatWeb.com, The Online Materials Database and is reprinted with their permission.
Copyright 1996-2005 by Automation Creations, Inc.
áThe contents, results, and technical data on this page may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.com.