Manganese Bronze 675 Material Property Data Sheet
Do you need custom fasteners created with Manganese Bronze 675? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing
Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Manganese Bronze 675 Bar Stock we have available to meet your needs.
Manganese Bronze A, UNS C67500
Subcategory: Bronze; Copper Alloy; Metal; Nonferrous Metal
Key Words: CDA 675
|Component|| Wt. %|
Fair to excellent corrosion resistance. Excellent hot workability. Fabricated by hot forging and pressing, hot heading and upsetting.
Applications: clutch discs, pump rods, shafting, balls, valve stems and bodies. Available as flat rod and shapes.
|Density||8.63 g/cc||0.312 lb/in│|| at 20░C (68░F)|
|Hardness, Rockwell B||65||65|| |
|Tensile Strength, Ultimate||448 MPa||65000 psi|| Annealed|
|Tensile Strength, Ultimate||565 MPa||81900 psi|| Hardened|
|Tensile Strength, Yield||207 MPa||30000 psi|| Annealed|
|Elongation at Break||25 %||25 %|| Hardened|
|Elongation at Break||33 %||33 %|| Annealed, in 482.6 mm.|
|Modulus of Elasticity||103 GPa||14900 ksi|| |
|Machinability||30 %||30 %|| UNS C36000 (free-cutting brass) = 100%|
|Electrical Resistivity||7.2e-006 ohm-cm||7.2e-006 ohm-cm|| Annealed|
References are available for this material.
áThis information is provided by
MatWeb.com, The Online Materials Database and is reprinted with their permission.
Copyright 1996-2005 by Automation Creations, Inc.
áThe contents, results, and technical data on this page may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.com.