quality fasteners on time of the higest grade materials including stainless steel, copper, brass, Ph grades, Aluminum, Exotics and more
Quality bolts, nuts, screws, sockets and studs manufactured of quality materials to inch fastener standards Home of Vegas Fastener Manufacturing Vegas Fastener Manufacturing as a quality alloy, a blend of the skills, capabilities and extensive experience of its manufacturing team. What products we make and how we can manufacture what you need to your exact specifications Request a quote Contact Us

Toll Free: 888-651-9223            

Inconel™ 600 Material Property Data Sheet

Do you need custom fasteners created with Inconel™ 600? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.

Below are the technical specifications of the Inconel™ 600 Bar Stock we have available to meet your needs.

 

Special Metals INCONEL® Alloy 600


Subcategory: Metal; Nickel Base; Superalloy

Key Words: Inconel 600, ASTM B163, ASTM B166, ASTM B167, ASTM B168, ASTM B366, ASTM B516, ASTM B517, ASTM B564, ASTM B751, ASME SB-163, SB-166 - SB-168, SB-564, Boiler Code Sections I, III, VIII, IX, Nickel-Chromium Alloy, NACE MR-01-75; QQ-W-390; MIL-R-5031, MIL-T-23227, MIL-N-23228, MIL-N-23229; AFNOR NC 15 Fe, SAE AMS 5540, 5580, 5665, 5687, 7232; DIN 17742, 17750 - 17754; Werkstoff Nr. 2.4816; VdTUV 305, UNS N06600; BS 3072 - 3076 (NA14)

Component   Wt. %
CMax 0.15 
Cr14 - 17 
CuMax 0.5 
Fe6 - 10 
MnMax 1 
NiMin 72 
SMax 0.015 
SiMax 0.5 

Material Notes:
Nickel content above includes cobalt. A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip, and wire.

Data provided by the manufacturer, Special Metals.

MicroGroup's inventory of small diameter 304 and 316 and other stainless steel, nickel based alloys, and titanium alloys exceeds 5 million feet. Redraw of material to specific sizes and shapes, as well as secondary operations to convert tubing into components and assemblies. Visit http://www.microgroup.com or Phone 1-800-ALL-TUBE (1-800 255-8823) or 1-508-533-4925.

Physical PropertiesMetricEnglishComments
Density8.47 g/cc0.306 lb/inł 

Mechanical Properties
Tensile Strength, Ultimate655 MPa95000 psi Annealed. Value at room temperature. Value at 550°C is 550 MPa.
Tensile Strength, Yield310 MPa45000 psi Annealed. Value at room temperature; 0.2% offset. Value at 550°C is 180 MPa.
Elongation at Break45 %45 % Annealed. Value at room temperature. Value at 550°C is 42%.

Electrical Properties
Electrical Resistivity0.000103 ohm-cm0.000103 ohm-cm 
Magnetic Permeability1.011.01 at 200 oersted (15.9 kA/m)
Curie Temperature-194 °C-317 °F 

Thermal Properties
CTE, linear 20°C13.3 µm/m-°C7.39 µin/in-°F 20-100°C
Heat Capacity0.444 J/g-°C0.106 BTU/lb-°F 
Thermal Conductivity14.9 W/m-K103 BTU-in/hr-ft˛-°F 
Melting Point1354 - 1413 °C2470 - 2580 °F 
Solidus1354 °C2470 °F 
Liquidus1413 °C2580 °F 

 


 This information is provided by MatWeb.com, The Online Materials Database and is reprinted with their permission.

Copyright 1996-2005 by Automation Creations, Inc.  The contents, results, and technical data on this page may not be reproduced either electronically, photographically or substantively without permission from Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of information from MatWeb.com.