Alloy 20 Material Property Data Sheet
Do you need custom fasteners created with Alloy 20? Since our inception, Vegas Fastener Manufacturing has met every challenge of providing
Quality, Timely, Cost-effective solutions for specialty fastener applications. Every product is built to your specifications, using your prints if necessary.
Below are the technical specifications of the Alloy 20 Bar Stock we have available to meet your needs.
Alloy 20-245 Precious Metal Alloy
Subcategory: Metal; Nonferrous Metal
All values may vary dependant on specific design and usage
Information provided by California Fine Wire.
|Density||11.5 g/cc||0.414 lb/in│|| |
|Tensile Strength @ Break||765 MPa||111000 psi|| Stress relieved|
|Tensile Strength @ Break||862 MPa||125000 psi|| Hard|
|Modulus of Elasticity||63.8 GPa||9250 ksi|| |
|Electrical Resistivity||4.07e-005 ohm-cm||4.07e-005 ohm-cm|| 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02|
|Temperature Coefficient of Resistance||Max 0.00002 ohms/ohm-░C|| 0-100░C|
|Thermal EMF vs Copper||-0.041 mV|| ||
áThis information is provided by
MatWeb.com, The Online Materials Database and is reprinted with their permission.
Copyright 1996-2005 by Automation Creations, Inc.
áThe contents, results, and technical data on this page may not
be reproduced either electronically, photographically or substantively without permission from
Automation Creations, Inc and MatWeb.com. No warranty, neither expressed nor implied, is given
regarding the accuracy of this information. The user assumes all risk and liability in connection with the use of
information from MatWeb.com.